Aqualogis Undersink Drinking Kit With 15mm Saddle Valve
Aqualogis Style - Undersink Drinking Water Tap Filter Kit System Including Faucet and Accessories
You are purchasing a high quality under sink filter system which includes a high quality carbon filter, which removes chlorine, organic contaminants, odours and toxins from your water, providing high quality tasting drinking water on tap.
This Aqualogis Style filter kit comes complete with the following:
1 x Inline Carbon filter made from High grade coconut shell carbon with 1/4" PF connectors - Filter manufacturd in Europe to the TÜV, NSF Standard
1 x Mounting Clip to secure AL-QC10 Carbon filter
1 x Self Piercing Saddle Valve Clamp Connection Connects To Copper Pipe
3m x length of 1/4" tubing (to connect to filter and faucet)
1 x High Quality Chrome Faucet complete with all fittings
The kit is suitable for standard 12 to 15mm copper pipe. For safety locate your mains water STOP COCK before installing. Select the position of the tap on your counter or sink unit. TIP Ensure you have room underneath to connect filter to bottom of tap.
Drill a 12mm hole. TIP: use a smaller drill bit first to make a “pilot hole”.
Remove nut from tap tail and push tap tail through hole, first making sure that the washers are fitted to tail as per photo. (Large chrome washer, large rubber washer then small rubber washer).
Now insert tap tail through the hole. Then secure the tap underneath the counter by using the other washers. (Small rubber washer, castellated washer then the nut). Use a spanner to tighten up the bottom securing nut.
Connect the spare plastic pipe to the bottom of the tap:
(IF NOT ALREADY CONNECTED)This is the pipe that is not connected to the saddle valve.
Place the 2nd nut onto this tube, then the small white plastic “olive”. Push the tube up into the tap tail an inch or so. Now bring the nut up so that the white small white plastic “olive” is pressed into the tap tail. (This makes it water tight). Finger tighten this nut then secure firmly with at least one full spanner turn.
Position Your Aqualogis AL-QC10 Inline Filter under your sink. Place the fixing bracket on the filter and choose a suitable positon (often this is attached to the side of the undersink cupboard). Mark with a pencil. Remove brackets from filter and screw into place
Connect the saddle valve to the cold water pipe. Finger tighten the clamp by turning the bottom nut. Then tighten properly with a spanner. Do NOT over tighten. One or two spanner turns after finger tight should do. Do not split your pipe ! The aim is simply to make the saddle valve immovable on the pipe.
Fitting Your New AL QC10 Filter
Take your inline filter and check flow direction is correct (see Flow arrow on the filter. Arrow points in the direction the water should flow ie to your tap).
Select your first tube end ie from tap or water connection. Aqualogis AL-QC10 has 1/4" PushFit connectors both ends just push the water tube into the filter about 19mm both ends.
Flush the New Inline AL-QC10 Filter Through. Turn water supply to fridge back on and run water through for AT LEAST two minutes plus. This is to remove natural carbon dust and trapped air. When water runs clear it's ready to drink
Check for leaks when flushing and double check for leaks 10 minutes later. Look for any tiny amount of leaking at the filter ends. If this happens redo fittings as above.
Goods can be returned for exchange or refund within 14 days of delivery provided the item is returned unused, in its original packaging and with the manufacturer’s tags attached (if applicable). This does not affect your statutory rights.
If you wish to return an item that has been accepted for delivery contact us at email@example.com
Send it to:
Aqualogis Europe Ltd
River Wharf Business Wharf
Unit 1, Mulberry Way
We recommend that you use an insured, registered carrier as we will not be held liable for the cost of return or lost or damaged items. Please note for the return of unwanted goods we will refund the price of the goods but not the delivery charge.
Please make sure that you have checked your item upon delivery – damage in transit will be replaced only when delivery note mentioned about the damage.
To return an item that is damaged on delivery contact us at firstname.lastname@example.org to discuss the fault and how the matter can be rectified.
We are unable to accept returns for goods that have been treated, used, damaged or modified in any way or are bespoke items.